01 / FIXATION
Four locking screws
Two distal screws insert medially and two proximal screws insert intramedullary.
Products / Foot + Ankle / Radian
Radian™ MIS Bunion Correction System
Radian™ MIS Bunion System
A titanium alloy plate-and-screw construct for fixation of osteotomies and correction of hallux valgus.
Product overview
Fixation of osteotomies and correction of hallux valgus.
The Radian™ MIS Bunion System consists of a titanium alloy plate and four locking screws that provide fixation for correction of a first metatarsal bunion.
The design allows medial insertion of the two distal screws and intramedullary insertion of the two proximal screws. The plate can be attached to the metatarsal head before the osteotomy, allowing control of the capital fragment at all stages of the procedure.
The plate is provided in two configurations: a gold plate for IM shifts greater than 10 degrees and a blue plate for IM shifts less than 10 degrees.
02 / CONTROL
Pre-osteotomy attachment
The plate may be attached to the metatarsal head before the osteotomy.
03 / CONFIGURATIONS
Two configurations
A gold plate is provided for IM shifts greater than 10 degrees and a blue plate for IM shifts less than 10 degrees.
Product highlights
Medial distal screw insertion and intramedullary proximal screw insertion.
System specifications
Sizes and ordering information.
Plate material
Titanium alloy
Fixation
Four locking screws
Screw range
3.0mm; 14, 16, 18, 20, 22, 24, 26, 28, and 30mm
Plates and screws
| Part Number | Description |
|---|---|
| Plates | |
| BUN-PLT-05 | 5.0mm Correction L-Bunion Plate |
| BUN-PLT-03 | 5.0mm Correction L-Bunion Plate 30 deg |
| Screws | |
| TB-30-14L | 3.0mmD, 14mmL Headed, Locking Screw |
| TB-30-16L | 3.0mmD, 16mmL Headed, Locking Screw |
| TB-30-18L | 3.0mmD, 18mmL Headed, Locking Screw |
| TB-30-20L | 3.0mmD, 20mmL Headed, Locking Screw |
| TB-30-22L | 3.0mmD, 22mmL Headed, Locking Screw |
| TB-30-24L | 3.0mmD, 24mmL Headed, Locking Screw |
| TB-30-26L | 3.0mmD, 26mmL Headed, Locking Screw |
| TB-30-28L | 3.0mmD, 28mmL Headed, Locking Screw |
| TB-30-30L | 3.0mmD, 30mmL Headed, Locking Screw |
Instruments
| Part Number | Description |
|---|---|
| Instruments | |
| BUN-1000T-DGID | Drill Guide |
| BUN-1000T-DR30 | 3.0mm Diameter Drill |
| BUN-1000T-OPIN | Olive Pin |
| TB-1000T-ISRT | Screw Inserter |
| BUN-1001T-DPG | Depth Gauge |
| HAN-1000T-AOSM | Handle |
| BUN-1000T-SPIN | Small Olive Pin |
| CSRW-1000T-352 | 2.4mm x 150mm K-Wire |
| BUN-1000T-SGID | Drill and Screw Guide |
| BUN-1000T-SGHS | Drill and Screw Guide Holding Screw |
| BUN-1000T-KDG | K-wire Depth Gauge |
| BUN-1000T-SG30 | Drill and Screw Guide 30° |
| BUN-1000T-SGHS | Drill and Screw Guide Holding Screw |